Antminer D3 Dash Miner

$160.00/0.00416332

Free worldwide shipping on all orders over $50

  • 30 days easy returns
  • Order yours before 2.30pm for same day dispatch
Guaranteed Safe Checkout

Description

Bitmain Antminer D3 (19.3Gh)

Description

Model Antminer D3 (19.3Gh) from Bitmain mining X11 algorithm with a maximum hashrate of 19.3Gh/s for a power consumption of 1350W.

Specifications

Manufacturer Bitmain
Model Antminer D3 (19.3Gh)
Release October 2017
Size 130 x 190 x 320mm
Weight 5500g
Noise level 75db
Fan(s) 2
Power 1350W
Wires 9 * 6pins
Voltage 11.60 ~13.00V
Interface Ethernet
Temperature 0 – 40 °C
Humidity 5 – 95 %

Minable coins

Dash (DASH)

CannabisCoin (CANN)
CannabisCoin (CANN)

MonetaryUnit (MUE)
MonetaryUnit (MUE)

Onix (ONX)
Onix (ONX)

DigitalpriceClassic (DPC)
DigitalpriceClassic (DPC)

1. Specifications and other information of the Antminer D3 are as mentioned below.

2. Please select the correct address for shipping before you submit your order because, for this batch, the shipping address cannot be changed after the order has been submitted.

3.The shipping for this batch will start on a first-order-first-ship basis in  March 2018 for orders that antminers9 has received full payment for. We advise you to research and prepare in advance for the customs’ clearance in your country to avoid delays or unexpected costs.

5. You will need an ATX PSU with at least 10 six-pin PCIe connectors. There are 3 six-pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. antminers9 recommends the APW3++ to power the D3.

6. Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply.

Parameters of ANTMINER D3

No.

Parameters

Value

1

Product model

D3

2

Hash ASIC type

BM1760

4

Total quantity of hash chips

180 chips

5

Total quantity of hash boards

3 boards per miner

6

Total hash rate

17GH/s±5%

7

DC voltage input

11.60~13.00 V

8

DC current input @12V DC

 75.2A +5%

9

DC Power @12V DC input

 902W +7%

10 220VAC Power @25℃ ,93%

conversion efficiency of APW3

970 W +7%

11 220VAC Power efficiency @25℃,93% conversion efficiency of APW3 57mJ/MH+7%
12

Weight(without package)

 4.2 kg

13

Operation temperature

0-40 ℃

14

Storage temperature

-40-85 ℃

15

Operation humidity

5%RH-95%RH,

prevent condensation

16

Noise

76 dB

17

Networking connection mode

Ethernet Cable

18

Power connection mode

All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent  the control board to be powered up before hash boards be powered up.

19

Size(Length*Width*Hight,without package)

320mm*130mm*190mm

Payment

1. BTC(Bitcoin) and other Crypto accepted in this batch.

For the BTC payment method , please use the exact amount mentioned in your order and complete the payment within one hour. After one hour, the order will expire and your payment may not be detected by the system automatically. Payment must be in BTC. We cannot accept payment in BCH. If you send BCH to the BTC wallet the coins may be lost. If the payment is submitted but the receipt is delayed, we will make your payment “Valid” manually.

Reviews

There are no reviews yet.

Be the first to review “Antminer D3 Dash Miner”

Your email address will not be published. Required fields are marked *

Dash Miner
Antminer D3 Dash Miner
$160.00/0.00416332 Add to cart