Bitmain Antminer L3+ (504Mh)
Model Antminer L3+ (504Mh) from Bitmain mining Scrypt algorithm with a maximum hashrate of 504Mh/s for a power consumption of 800W.
|Model||Antminer L3+ (504Mh)|
|Size||188 x 130 x 352mm|
|Wires||9 * 6pins|
|Voltage||11.6 ~ 13.0V|
|Temperature||0 – 40 °C|
|Humidity||5 – 95 %|
1. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
2. You will need an ATX PSU with at least 9 six-pin PCIE connectors. There are 2 PCI-e connectors for +12V DC input on each hashing board and both need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the APW3++ to power the L3+
3. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 9 PCIE connectors are connected to power supply.
1. BTC(Bitcoin) payment and other crypto payments are accepted in this batch, please use the exact amount mentioned in your order and complete the payment within one hour. After one hour, the order will expire and your payment may not be detected by the system automatically.
2. The shipping cost, custom charges, and taxes (if any) are not included in the retail price shown above.
3. Please fill your desired quantity, shipping address and select your preferred shipping service while placing an order to learn the shipping cost to your shipping address.
1. A 180-day warranty is provided starting from the shipping date.